|
TAC Supply Engineering, we are supplier for many product and one of that is a product of Vigour, VSP-U Series.VSP-U Series is a good product.VSP-U Series is a high quality product.VSP-U Series is a product that you can confident.TAC Supply Engineering, we are supplier for many product and one of that is a product of Vigour, VSP-U Series.VSP-U Series is a good product.VSP-U Series is a high quality product.VSP-U Series is a product that you can confident. |
|
 |
|
|
|
 Purge assemblies |  |
| Brass chrome plated bidy for non-corrosive gases and mixtures up to grde 6.0 |
| Stainless steel 316L body and bonnet for corrosive and toxic gases |
| Diaphragm type shut-off valves |
| Suitable for inlet pressure up to 300 bar |
| Tested for use with oxygen |
Straight purge assemblies
The straight purge assembly is connected to the regulator body via an auxiliary high pressure port. The gas is vented through the body to a downstream location. |
Tee purge assemblies
The tee purge can be connected between the cylinder and the regulator, or between the regulator and the instrument. The system can be flushed with the purging gas to remove contaminants prior to start-up or after a cylinder change. |
Cross purge assemblies
The cross purge assembly is used between the cylinder and the regulator. In addition to the features on the tee purge, the cross purge assembly allows the use of inet purge gas. |
Block & bleed purge assemblies
Block and bleed purges are typically used in manifolds or other applications where atmospheric contaminates need to be purged after cylinder changeout. |
|
| Type : | Purge assemblies |
| Materials Body : | see ordering info |
| Diaphragm : | Hastelloy C276 |
| Temperature range : | -30 C to +74C |
| Leak rate : | 1x10 mbar l/s He |
| Orifice : |  3.2mm |
|
 |
|
 |
 |
|
|
Product Features